| |
|
| Model
HMC Die Cushion is rugged, heavy duty unit that produces
extremely high R.H.F. within a given area, and is designed to withstand
long, continuous heavy stamping operations including compound blanking
and drawing. THE MOST POWERFUL PNEUMATIC DIE CUSHION AVAILABLE. |
|
FEATURES:
* Mounting may be made to bolster plate, to press frame or to the
press superstructure with a large mounting plate to the mounting surface.
* Construction is of high grade steel, welded and normalized with
bronzed bearing surfaces for long wear.
* Extra overlap between cylinder and piston and the center stem assures
excellent internal guiding. External guiding mechanism can be designed
to eliminate off-center load damage.
* This series has a dual chamber design and includes a booster pump
as standard equipment resulting in extremely high R.H.F.
* An internal centralized lubrication system distributes lubricant
by channeling through space provided between concentric tubes within
the piston rod, thereby eliminating grease tubing. External centralized
fittings available at customer's option.
* All units are complete with standard or custom built pin pad, all
necessary mounting structure, pressure regulator, gauge, booster pump,
hoses, fittings, surge tank with safety pop-off-valve, drain cock,
and Installation Service Manual.
* Each installation is warranted for one year from date of shipment. |
|
|
|
Dayton
Die Cushions
dayton@daytondiecushions.com